International. Sodeca promotes a new edition of microlearnings with half-hour sessions, focused on the requirements and pressurization solutions for evacuation routes.
A program run by engineers specialized in smoke control. On October 7, the microprogram will be inaugurated by Miguel García, smoke control and HVAC engineer and Project Manager at SODECA SLU.
3 sessions of 30 minutes at 16.30h (Spain time) – 9:30 a.m. (Bogotá time)
This new edition of microlearnings consists of a total of three sessions focused on pressurization for evacuation routes: requirements and solutions, according to the requirements of the UNE EN 12101-6 standard.
Session 1: October 7. Pressurization of evacuation routes. Objectives and classes of systems: The objectives of a system of pressurization of evacuation routes, the spaces that must be pressurized, as well as different types of system that are defined in the UNE EN 12101-6 standard are defined in order to know the necessary criteria for the design.
Session 2: November 4. Pressurization of evacuation routes. Calculation for the sizing of the system: The calculation processes are defined to determine the flows necessary for the different situations contemplated by the UNE EN 12101-6 standard and calculation examples are made, manually and through the pressurization calculation tool included in the SODECA QuickFan Software.
Session 3: November 25. Pressurization of evacuation routes. System components: The requirements required by the UNE EN 12101-6 standard are defined for each of the components that must be part of an evacuation route pressurization system.
This is the second edition of the microlearning format, after having received the excellence of the participants in the first program focused on indoor air quality.
Free registration!
For more information email [email protected] or on the website www.sodeca.com
