Account
Please wait, authorizing ...

Don't have an account? Register here today.

×

Energy saving in cooling chambers

A series of important steps to follow to obtain significant energy savings in a cold room, from installation to commissioning.

by Eng. Willian Morales*

The global problem of air pollution as well as the global warming of the planet, make it essential to save the energy consumed with HVAC systems & R, about 20% of the world's energy is consumed in this area, so it is a priority to  carry out there a work of generating legal regulations that invoke and impose on manufacturers and users the concept of energy saving, here in the Republic of Peru from March the labeling of all electrical products and mec was forced Electric nic when applying a Supreme Decree No. 053 – 2007 – EM.

In a cold room must be taken into account from its construction with great care thinking of a minimum energy consumption and maximum efficiency for the work entrusted to the conservation of perishable products, the care and recommendations must be simple and understandable, we can list these approaches to achieve the objective:

- Publicidad -

1.- Generate an insulator thickness calculated in accordance with the temperature of the product to be preserved.

2.- Locate the condensing unit and the evaporator unit with maximum operating efficiency criteria, for this we will place the condensing unit with the entry of the air to the condenser in the direction of the natural wind of the city, it would be useless to buy a highly efficient condensing equipment, if the location of the same is defective, as many
Sometimes, I find many condensing units placed in unventilated places, causing excessive electricity consumption due to their high condensation temperature, consuming up to 35% more energy than it would consume if it were well placed in a good location.

3.- The evaporator unit is another detail, I have seen diffusers placed in front of the entrance door of the cold room, which is not very advisable, evaporators stuck to the ceiling of the, which due to the coanda effect much of the cold remains on the roof of the cold room.

4.- Of the suction insulators that are never changed, generating 5-7% of energy consumption as a result of increasing the overheating in the suction pipe.

5.- Choice of suitable refrigerant as well as the working pressure of the system on the low pressure side considering that a high quality cold and a correct value of the reheating in said evaporator must be sought.

6.- Likewise, we must consider that the maintenance of the condensing and evaporator unit must be rigorous because only this carelessness in the electrical mechanical maintenance of a cold room results in a high consumption of electricity and greater environmental pollution since in the electricity generation more quantity has to be consumed
of fossil fuels.

7.- The correct sizing of the refrigerant gas pipes

- Publicidad -

8.- It is important that the system is balanced, each component in accordance with the capacity of the compressor or condensing unit at work regime.

9- Finally there are many factors that must be met today in this modern world, such as electronic thermostats, variable speed drives of electric motors, the previous design of the cold room for energy saving purposes that are several more to continue listing.

* Eng. Willian Morales Quipe.  Mechanical Electrician UNI – CIP N° 93846. General Manager RETER EIRL – PERU. You can be contacted by email: [email protected]

Duván Chaverra Agudelo
Author: Duván Chaverra Agudelo
Jefe Editorial en Latin Press, Inc,.
Comunicador Social y Periodista con experiencia de más de 16 años en medios de comunicación. Apasionado por la tecnología y por esta industria. [email protected]

No thoughts on “Energy saving in cooling chambers”

• If you're already registered, please log in first. Your email will not be published.

Leave your comment

In reply to Some User
Free Subscription
SUBSCRIBE TO OUR NEWSLETTER
DO YOU NEED A SERVICE OR PRODUCT QUOTE?
LASTEST INTERVIEWS

Entrevista a Jaime Maldonado, Presidente de Air-Con Inc

En entrevista con ACR Latinoamérica, Jaime Maldonado, Presidente de Air-Con Inc, destacó los proyectos que tiene la compañía para este año 2024, sobre todo con la transición de los nuevos refrigerantes. Además, Air-Con estará como expositor en Refriaméricas Miami, y Jaime nos habló sobre sus expectativas con el evento y lo que darán a conocer para todos los visitantes.

Webinar: Armstrong y Energía de Distrito

Por: Rafael Behar, Gerente de Apoyo de Aplicación, Armstrong Fluid Technology Los sistemas de energía de distrito se caracterizan por una o más plantas centrales que producen agua caliente, vapor y/o agua fría, que luego fluye a través de una red de tuberías aisladas para proporcionar agua caliente, calefacción y/o aire acondicionado a los edificios cercanos. Los sistemas de energía de distrito sirven a una variedad de mercados de uso final, incluidos los centros de las ciudades (distritos comerciales centrales), campus universitarios, hospitales e instalaciones de atención médica, aeropuertos, bases militares y complejos industriales. Al combinar cargas para múltiples edificios, los sistemas de energía urbana crean economías de escala que ayudan a reducir los costos de energía y permiten el uso de tecnologías de alta eficiencia. En este seminario web vamos a introducir a Armstrong Fluid Tecnología y su dirección para la energía urbana con enfoques en plantas de calefacción. https://www.acrlatinoamerica.com/20...

Webinar: Mejores Practicas para la Optimización de Sistemas

Importancia de la correcta automatización de plantas de agua helada con el objetivo de pasar al siguiente nivel, que es la optimización de los sistemas para obtener una mayor eficiencia energética y ahorro del costo operativo y de mantenimiento. Por: Camilo Olvera Rodríguez, Gerente de Ventas - México, ARMSTRONG FLUID TECHNOLOGY https://www.acrlatinoamerica.com/20...

Webinar: Enfriando el futuro: Las nuevas tendencias en refrigerantes para supermercados y almacenes

https://www.acrlatinoamerica.com/20... Únete a nosotros en este emocionante Webinar sobre las últimas tendencias en refrigerantes para supermercados y almacenes. Descubre cómo mantener tus productos frescos de manera eficiente, mientras contribuyes a la sostenibilidad y cuidado del medio ambiente. En esta sesión, exploraremos las innovaciones más recientes en refrigerantes ambientalmente preferibles, incluyendo tecnologías avanzadas de enfriamiento. Aprenderás sobre las ventajas de adoptar estas nuevas soluciones, no solo en términos de eficiencia energética, sino también en la reducción de emisiones y el cumplimiento de regulaciones ambientales. Por: Guillermo Brandenstein, Sr Account Manager - Honeywell

Webinar: ¿Es adecuada la forma de vender en las empresas HVAC/R?

En esta presentación se tratarán puntos neurálgicos sobre cómo lograr vender sin necesidad de licitar, teniendo muy presente que el cliente no nos compre porque somos los más baratos sino porque somos su mejor opción. Por: Ing. Rolando Torrado, CEO - Rolando Torrado https://www.acrlatinoamerica.com/20...
Load more...
SITE SPONSORS










LASTEST NEWSLETTER
Ultimo Info-Boletin