Account
Please wait, authorizing ...

Don't have an account? Register here today.

×

How to optimize the use of air conditioning

The ideal would be to avoid the use of air conditioning, this would be achieved with an architecture of a lot of mass, few and shaded windows, also allowing cross ventilation and with floor to ceiling heights of at least 3mts., like that architecture of the first half of the S.XX.  This would obviously complicate the winter situation, but warming up in general, is in any case cheaper than cooling. On the other hand, in rather dry climates such as Santiago, it becomes simpler to cool, because the air has little mass, practically does not overheat; in these places it is enough to be in the shade and with the air minimally moving.

Nowadays the opposite is done, that is: a lot of transparency (no sun protection), no possibility of opening the windows (natural ventilation does not exist), little mass (the available of the structure is canceled with carpets or wooden floors, in addition to the false skies and partitions) and there are no great interior heights. With all this the use of air conditioning is essential, in reality these systems "save" the architecture, but it is achieved with large energy consumption and costs forever. It should be noted that this construction modality has the advantage that: it is quick to build, more economical, with better seismic behavior and allows free plants.
Returning to the architecture initially described is already unlikely (slow, expensive, low efficiency of plants and total height built), but the recommendation is to take certain principles.

That is: continue with the current construction system in general, but with more controlled openings in size and with exterior sun protection (not even the best glass is able to "brake" the sun, as an opaque barrier does), where its windows can be opened (in many cases the air conditioning is turned on to remove stale air and lower the temperature one or two degrees, which opening them would solve the problem). Use floors such as ceramics, stones or porcelain tiles of light tones, or leave the concrete type polished. The skies leave them in sight or finish them with microperforated materials, so that the slab has contact with the interior environment (all to absorb heat), and finally, something not entirely used in the country: forcibly ventilate and at night the interiors. In dry climates, as already mentioned before, the outside air is quite cool at night, because it does not have enough mass to retain heat. In Santiago, in the middle of summer this temperature is approximately 10ºC on average, ideal, especially for sunny weekends where the air conditioning does not turn on. So on Monday mornings the interior is cool and it is not necessary to use air conditioning. Some new buildings turn on the cooling system on Sunday afternoons to avoid this inconvenience, which obviously makes it more expensive.

With all the above, the cooling system would not be eliminated, but its insurance use will be less and its useful life of the equipment will be longer. In general, these systems are currently used to correct design errors and not to improve the climate.

Authors:

See original.

Free Subscription
SUBSCRIBE TO OUR NEWSLETTER
DO YOU NEED A SERVICE OR PRODUCT QUOTE?
LASTEST INTERVIEWS

Entrevista a Jaime Maldonado, Presidente de Air-Con Inc

En entrevista con ACR Latinoamérica, Jaime Maldonado, Presidente de Air-Con Inc, destacó los proyectos que tiene la compañía para este año 2024, sobre todo con la transición de los nuevos refrigerantes. Además, Air-Con estará como expositor en Refriaméricas Miami, y Jaime nos habló sobre sus expectativas con el evento y lo que darán a conocer para todos los visitantes.

Webinar: Armstrong y Energía de Distrito

Por: Rafael Behar, Gerente de Apoyo de Aplicación, Armstrong Fluid Technology Los sistemas de energía de distrito se caracterizan por una o más plantas centrales que producen agua caliente, vapor y/o agua fría, que luego fluye a través de una red de tuberías aisladas para proporcionar agua caliente, calefacción y/o aire acondicionado a los edificios cercanos. Los sistemas de energía de distrito sirven a una variedad de mercados de uso final, incluidos los centros de las ciudades (distritos comerciales centrales), campus universitarios, hospitales e instalaciones de atención médica, aeropuertos, bases militares y complejos industriales. Al combinar cargas para múltiples edificios, los sistemas de energía urbana crean economías de escala que ayudan a reducir los costos de energía y permiten el uso de tecnologías de alta eficiencia. En este seminario web vamos a introducir a Armstrong Fluid Tecnología y su dirección para la energía urbana con enfoques en plantas de calefacción. https://www.acrlatinoamerica.com/20...

Webinar: Mejores Practicas para la Optimización de Sistemas

Importancia de la correcta automatización de plantas de agua helada con el objetivo de pasar al siguiente nivel, que es la optimización de los sistemas para obtener una mayor eficiencia energética y ahorro del costo operativo y de mantenimiento. Por: Camilo Olvera Rodríguez, Gerente de Ventas - México, ARMSTRONG FLUID TECHNOLOGY https://www.acrlatinoamerica.com/20...

Webinar: Enfriando el futuro: Las nuevas tendencias en refrigerantes para supermercados y almacenes

https://www.acrlatinoamerica.com/20... Únete a nosotros en este emocionante Webinar sobre las últimas tendencias en refrigerantes para supermercados y almacenes. Descubre cómo mantener tus productos frescos de manera eficiente, mientras contribuyes a la sostenibilidad y cuidado del medio ambiente. En esta sesión, exploraremos las innovaciones más recientes en refrigerantes ambientalmente preferibles, incluyendo tecnologías avanzadas de enfriamiento. Aprenderás sobre las ventajas de adoptar estas nuevas soluciones, no solo en términos de eficiencia energética, sino también en la reducción de emisiones y el cumplimiento de regulaciones ambientales. Por: Guillermo Brandenstein, Sr Account Manager - Honeywell

Webinar: ¿Es adecuada la forma de vender en las empresas HVAC/R?

En esta presentación se tratarán puntos neurálgicos sobre cómo lograr vender sin necesidad de licitar, teniendo muy presente que el cliente no nos compre porque somos los más baratos sino porque somos su mejor opción. Por: Ing. Rolando Torrado, CEO - Rolando Torrado https://www.acrlatinoamerica.com/20...
Load more...
SITE SPONSORS










LASTEST NEWSLETTER
Ultimo Info-Boletin